• Code Composer Studio Note: If you already have CCSv6.0 or higher installed on your machine, you can skip the CCS installation procedure. If you want to ADD a target or two to your CURRENT installation, simply run the installation again and install these new components. Install Code Composer Studio 6.0 or newer 1.
• Select “Code Composer Studio” and click “Uninstall” or “Remove” then follow the instructions. If you can’t uninstall it from the Control Panel or it doesn’t appear in the Control Panel, run the program’s built-in uninstaller. Click “Start,” “All Programs,” “Code Composer Studio,” and then click “Uninstall.”.

TI 15.4-Stack Terms and Acronyms¶

When Code Composer was upgraded, the other options were unchecked. Yet, upon installation of the Code Composer upgrade. Sd560v2Cnfg, SdConfigExv4, BH560v2, and Blackhawk were also installed. I was able to remove Blackhawk via Add/Remove programs. How do I uninstall the other three programs?

AES

Advanced Encryption Standard.

AES-CCM

AES Counter with CBC-MAC.

AES-CMAC

AES Cipher-based Message Authentication Code.

CBC-MAC

Cipher Block Chaining Message Authentication Code.

CBKE

Certificate-Based Key Establishment.

CCFG

Customer Configuration Area.

Customer Configuration Area, contains lock-bits on flash page 31 andthe Customer Configuration Table (.ccfg).

CCS

Code Composer Studio.

CLI

Command Line Interface.

CSMA/CA

Carrier Sense Multiple Access with Collision Avoidance

This prevents nodes from talking while the air is occupied. Used inall bands except 868MHz

CSRK

Connection Signature Resolving Key.

DFE

Direct Frame Exchange.

DH1CF

Direct Hash Channel Function

This is used to produce a psuedo-random channel sequence for frequencyhopping devices.

ECDH

Elliptic Curve Diffie-Hellman.

ECHDE

Elliptic Curve Diffie-Hellman Ephemeral.

ECJPAKE

Elliptic Curve J-PAKE.

FAN

Field Area Network.

FFD

Full Functionality Device.

GCC

GNU Compiler Collection

A compiler system produced by the GNU Project, which support variousprogramming languages such as C and C++.

GUI

Graphical User Interface.

HIB

Halt In Boot

A mechanism in CC26xx and CC13xx devices to ensure that the externalemulator can take control of the device before it executes anyapplication code.

HMAC

Hash-based message authentication code.

IAR

IAR Systems.

ICALL

Indirect Call.

IDE

Integrated Development Environment.

IEEE

Institute of Electrical and Electronics Engineers.

IRK

Identity Resolving Key.

J-PAKE

Password Authenticated Key Exchange by Juggling.

LBT

Listen Before Talk

This prevents nodes from talking while the air is occupied. Used in868MHz band.

MAC

Medium Access Control.

MCU

Microcontroller Unit.

MIC

Message Integrity Code.

MITM

Man In The Middle.

MMO

Matyas-Meyer-Oseas.

NV

Non-Volatile Memory.

OOB

Out-Of-Box.

OSI

Open Systems Interconnection model.

PAN

Personal Area Network.

PBKDF2

Password-Based Key Derivation Function 2.

PHY

Physical layer of the OSI model.

PIB

Personal-Area-Network Information Bases.

RAM

Random Access Memory.

RCFG

ROM Configuration

TI-RTOS in ROM Configuration Table

RNG

Random Number Generator.

RF

Radio Frequency.

RFD

Reduced Functionality Device.

ROM

Read-only Memory.

RTOS

Real Time Operating System.

SKKE

Symmetric-Key Key Establishment.

SNV

Simple Non-Volatile storage.

SUN

Smart Utility Network.

TRNG

True Random Number Generator.

VIMS

Versatile Instruction Memory System

A system control module that handles access to the device memory areasfrom the CPU and system bus. You can read more in the CC13x2 CC26x2 SimpleLink Wireless MCU Technical Reference Manual.

Sensor Controller Terms and Acronyms¶

SC

Sensor Controller

A dedicated 16-bit CPU core on CC13xx and CC26xx devices, located inthe auxiliary (AUX) power/clock domain. It can perform simplebackground tasks autonomously and independently of the System CPU andthe MCU domain power states.

SCS

Sensor Controller Studio

A stand-alone IDE used to write, test and debug code for the SensorController.

TI-RTOS Terms and Acronyms¶

HWI

Hardware Interrupts

A TI-RTOS hardware interrupt.

Idle Task

A TI-RTOS default task that is executes when no other higherpriority thread needs to run.

RCFG

TI-RTOS in ROM configuration table.

ROV

Runtime Object View

A TI-RTOS kernel plugin for CCS and IAR toview a target’s instrumentation data.

RTC

Real-Time Clock

An accurate computer clock which keeps track of the current time.

RTOS

Real Time Operating System

An operating system intended to serve applications with real-timerequirements.

SWI

Software Interrupts

A TI-RTOS software interrupt.

TI-RTOS

Texas Instruments Real Time Operating System

An RTOS developed by TI for TI microcontrollers.

Zero-Latency Interrupts

An interrupt that will not be routed through the TI-RTOS kernel’s Hwidispatcher. For more information, see the Hwi module documentation inthe TI-RTOS Kernel API Reference .

Uninstall Code Composer Studio Mac Manual Free

Over-the-Air Download (OAD) Terms and Acronyms¶

BIM

Boot Image Manager

A bootloader that runs after the device’s ROM startup code. The BIM isresponsible for analyzing the image header of all images anddetermining the most suitable image to run. Once the BIM has found theproper image, it will jump to it’s program entry.

CRC

Cyclic Redundancy Check

An error-detecting code used to check the integrity of blocks of data.

ECDSA

Elliptic Curve Digital Signature Algorithm

A variant of the Digital Signature Algorithm (DSA) which uses ellipticcurve cryptography.

Factory Image

The factory image is a “golden” image that resides in external flashas a fail-safe mechanism.

HIB

Halt In Boot

A mechanism in CC26xx and CC13xx devices to ensure that the externalemulator can take control of the device before it executes anyapplication code.

OAD

Over-the-Air Download

The process of performing a device firmware update over the air.

OAD Target

The device whose firmware is being upgraded over the air. This isassumed to be a CC26xx or CC13xx device running the TIprotocol-specific transport for OAD.

OAD Distributor

The device responsible for accepting an OAD enabled image from thecompiler and transferring it over the air to the OAD Target.

Uninstall Code Composer Studio Mac Manually

Uninstall Code Composer Studio Mac Manual Download

General Terms and Acronyms¶

CCFG

Customer Configuration

Customer Configuration is set by the application and containsconfiguration parameters for the ROM boot code, device hardware, anddevice firmware. It contains lock-bits on the last page of flash. Youcan read more in the Customer Configuration section in the CC13x2 CC26x2 SimpleLink Wireless MCU Technical Reference Manual.

CCS

Code Composer Studio

An integrated development environment to develop applications forTexas Instruments embedded processors. Download: Code ComposerStudio

cJTAG

Class 4 IEEE 1149.7: Standard for Reduced-pin andEnhanced-functionality Test Access Port and Boundary-scanArchitecture. This is known by acronym cJTAG (compact JTAG).

GCC

GNU Compiler Collection

A compiler system produced by the GNU Project, which support variousprogramming languages such as C and C++.

HIB

Halt In Boot

A mechanism in CC13xx and CC26xx devices to ensure that the externalemulator can take control of the device before it executes anyapplication code.

IAR

Refers to IAR Systems’ IAR Embedded Workbench, which is an integrateddevelopment environment used for building and debugging embeddedapplications.

JTAG

IEEE standard 1149.1: Standard Test Access Port and Boundary ScanArchitecture Test Access Port (TAP). This standard is known by theacronym JTAG (Joint Test Action Group).

MCU

Microcontroller Unit

A small computer on a single integrated circuit.

NVS

Non-Volatile Storage

Storage of data in non-volatile memory (NVM). NVM retains saved dataduring power cycles. In the context of CC13x2 and CC26x2 devices, NVM eitherrefers to the internal flash or some external flash.

OAD

Over the Air Download

The process of performing a device firmware update over the air.

ROM

Read-only Memory

Type of non-volatile memory used in computers. Once data is written toROM, the data cannot be removed and can only be read.

RTSC

Real Time Software Components

A toolset for creating reusable code, used by TI-RTOS. SeeRTSC and RTSC-Pedia.

SysConfig

System Configuration Tool

SysConfig is a graphical interface for configuring software projects.Configuration files, C source files and header files are generated basedon the parameters configured in the SysConfig dashboard. SeeGet started with SysConfig.

TI-CGT

TI Code Generation Tools

Set of C/C++ Compilers and Assembly Language tools for many TImicrocontrollers and processors. For more information, see TI CodeGeneration Tools.

VIMS

Versatile Instruction Memory System

A system control module that handles access to the device memory areasfrom the CPU and system bus. You can read more in the CC13x2 CC26x2 SimpleLink Wireless MCU Technical Reference Manual.